Bartscher IK 27TC Original-Gebrauchsanleitung Seite 29

Check the power cord regularly for damage. Do not use the
•
appliance if the power cord is damaged. If this cable is damaged,
it must be replaced by customer service or a qualified electrician
in order to avoid dangers.
The supply cable must be disconnected from the socket
•
only by pulling the plug.
Never carry or lift the device by the supply cable.
•
In any case do not open the device housing. In case of
•
electrical or mechanical modifications the electric shock
hazard will occur.
Never immerse the appliance, the power cord and the power
•
plug in water or other liquids.
Do not use any acid agents and make sure no water ingresses
•
the device.
Never operate the device with moist hands or standing on wet
•
floor.
Remove the plug from its socket:
•
when the device is not used,
-
in case of anomalies during operation,
-
before cleaning.
-
HOT SURFACE! Burn hazard!
To avoid the hazard results please follow the instructions below.
During the operation the cooking surface becomes very hot.
•
Keep in mind, that the induction cooker itself does not produce
any heat during cooking. However, the heat from the pan will
leave the cooking surface hot! After use the surface is hot.
Do not touch!
- 25 -