Preset Stations - Pioneer F3 Serie Bedienungsanleitung

04 Listening to FM/AM

Preset stations

POWER
STANDBY
OFF ON
Note
1 When the preset channel is A1, pressing the  button or rotating the TUNING/PRESET dial to the left will cause the preset
channel to move to J10.
2 When a broadcast station is stored in memory, the MPX setting is simultaneously stored.
16
En
BAND MENU
RDS TUNED STEREO
DISPLAY AUTO PRESET
TUNER DIMMER
A/B/C D/E/F MPX
G/H I / J
1 2 3
4 5 6
7 8 9
10
VOLUME
AMP MUTE
A.PRESET
MENU A.TUNE
BAND TUNE MEMORY
PRESET ENTER PRESET
TUNE
1 Use the "Auto tuning" or "Manual
tuning" operation to tune in the station to be
preset in the memory.
F3
TUNING/PRESET 2 Press the MENU button to select menu.
3 Either turn the TUNING/PRESET dial or
press the / button to select "Memory".
4 Press the TUNING/PRESET dial or ENTER
button to set the preset mode and make the
preset channel number flash.
• Steps 1 to 4 can be skipped when using the
MEMORY button.
When this button is pressed, the preset
memory standby mode is set, regardless of
the menu setting at that time.
5 While the preset channel number is
flashing, press one of the preset channel
range (A to J) buttons to select the desired
memory block (A to J).
6 While the preset channel number is
flashing, either turn the TUNING/PRESET
dial, press the / or Station call (1 to 10)
button to select the desired preset channel (1
1
to 10).
7 While the preset channel number is
flashing, either press the TUNING/PRESET
dial or the MEMORY button to store the
station in the preset memory.
• To preset other channels, repeat steps 2 to
6.
• A total of 100 broadcast stations can be
preset — 10 stations (channels 1 to 10) in
each of blocks A to J.
2