System Update; Radio; Receiving Preset Stations; Best Stations Memory (Bsm) - Pioneer DEH-S520BT Bedienungsanleitung

Menu Item
FM STEP
[100], [50]
REAR-SP
[FUL]
[SW]

SYSTEM UPDATE

[SYSTEM INFO], [S/
W UPDATE]
SYSTEM RESET
[YES], [NO]

Radio

The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the
Middle East, Africa and Oceania. Use in other areas may result in poor reception. The RDS
(radio data system) function only works in areas that broadcast RDS signals for FM
stations.

Receiving preset stations

1
Press SRC/OFF to select [RADIO].
2
Press BAND/
3
Press a number button (1/
TIP
The / buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the
FUNCTION settings (page 24).

Best stations memory (BSM)

The six strongest stations are stored on the number buttons (1/
1
After selecting the band, press the M.C. dial to display the main menu.
Description
Select the FM tuning step from 100 kHz or 50 kHz.
Select when there is a full-range speaker connected to the rear
speaker output leads.
Select when there is a subwoofer connected directly to the rear
speaker output leads without any auxiliary amplifier.
Select [SYSTEM INFO] to confirm the latest system information
on the unit.
Select [S/W UPDATE] to update the unit to the latest software
and initialize the unit settings. For details on the latest software
and updating, visit our website.
Select [YES] to initialize the unit settings. The unit will be
restarted automatically.
to select the band from [FM1], [FM2], [FM3], [MW] or [LW].
to 6/ ).
- 7 - - 7 -
to 6/ ).