Technical Data - MTR+ Rehalito Bedienungsanleitung

Channels:
Waveform:
Intensity:
Classification:
Frequency:
Pulse Width:
Time Settings:
Max. Voltage:
Battery;
Environmental conditions for storage & transportation:
0-93% atmospheric humidity, -25 to +70 degree centigrade.
Environmental conditions for use: 0-93% atmospheric humidity,
+5 to +40 degree centigrade, air pressure 700-1060 hPa.
Dimensions of the device: H 11,7 cm / W 6,6 cm / D 3,3 cm
Weight of the unit: 150 g (incl. battery)
This device is quality controlled and fulfils the rules and regulations set by the German law for
medical products (MPG) as well as the guidelines of the European Community 93/42/EEC for
medical products. Therefore this device carries the CE-sign „CE 0123". The serial number is on
the rear of the device.
Manufacturer:
Kamenzer Damm 78, 12249 Berlin - www.mtrplus.com
Rehalito Bedienungsanleitung / Operators Manual

Technical Data

Two isolated independent channels
Asymmetrical, rectangular. bi-phasic with zero DC current
0 - 80 mA into 500 ohm load
70 mA maximum into 1000 Ohm load
65 mA maximum into 1500 Ohm load
(Indication only, actual intensity varies depending on
condition of skin electrodes)
Internally powered, constant current, continuous operation,
Type BF applied part, class IIa (MDD 93/42/EEC), IP20
1 - 150 Hz (Burst 35 - 150 Hz)
50 - 450 µS (Burst 50 - 200 µS)
Variable 1 minute to 9 hours 59 minutes (custom program)
180 V without load (70V with 1000 ohm load)
9 Volt 6LR61 / 6AM6 recommended
MTR+ Vertriebs GmbH,
26