Kenwood FDM30 Bedienungsanleitungen Seite 10

Mill Attachments
Never fit the blade assembly to the power unit without the jar/
lid fitted.
Never unscrew the jar/lid while the mill is fitted to your
appliance.
Do not touch the sharp blades – Keep the blade assembly
away from children.
Never remove the mill until the blades have completely
stopped.
The appliance will not work if the mill is incorrectly fitted.
Do not process hot ingredients in the mill allow to cool down
to room temperature before processing.
Mini Chopper/Mill
The processing of spices is not recommended as they may
damage the plastic parts.
Grinding Mill
Do not process dried turmeric root as it is too hard and may
damage the blades.
Juice extractor
Do not use the juicer if the filter is damaged.
The cutting blades on the base of the filter drum are very
sharp, take care when handling and cleaning the drum.
Only use the pusher supplied. Never put your fingers in the
feed tube. Unplug before unblocking the feed tube.
Before removing the lid, switch off and wait for the filter to
stop.
Express Dice/Express Serve Attachment and Discs
The cutting grid and discs are very sharp; handle with care
when fitting, removing and cleaning. Always hold by the
finger grip away from the cutting edge when handling
the sharp cutting blades, emptying the bowl and during
cleaning.
Never use your fingers to push food down the feed tube. Only
use the pusher supplied.
Do not use excessive force to push food down the feed tube –
you could damage your attachment.
Before removing the lid, switch off wait until the cutting disc
has completely stopped.
Do not pour hot liquids down the feed tube.
Express Serve
Avoid contact with moving parts. Keep fingers out of the food
outlet opening.
Do not operate when using the Dicer or Discs without the
slinger plate fitted. If the slinger plate is not fitted food will
4