Adjusting The Balance - RIBA ZS Handbuch

Caution!:
Please handel your balance with care.
Take notice of the following recommendations.
* Liquids (like water) which come in contact with the balance can harm the accuracy.
* Overload of the balance can harm the accuracy of the balance.
* Extreme temperature changes can harm the accuracy of the balance.
* A clash with a heavy machine can make the balance useless.
* Changes in the balance may only be done by your supplier.
* We recommend you to let the balance check by your supplier every year.
* Only trained employees are allowed to use the balance.
* If you warm up the balance for 15 minutes before using, the accuracy of the balance will be better.
* Only use the balance if it is locked rightly and has a serial number.
The balance can be sealed with a stamp or a sticker. Do not remove them from the balance.
* Always use the parts of your supplier.

Adjusting the balance:

When you have a standard weight (available with your supplier)
you can adjust the balance yourself:
* Turn off the balance.
* Press "mode" key and "on/zero" key simultaneously ("CAL0" appears on the display).
* The display tells you to put the appropriate adjusting weight on the scale.
* The first adjusting has been completed when the scale beeps.
* The display tells you to put the appropriate adjusting weight on the scale.
* The adjusting has been completed when the scale beeps 1 time and sais "done".
"DO NOT SHAKE THE BALANCE"
© RIBA WEEGTECHNIEK BV 19