RIBA ZS Handbuch Seite 25

CONNECTION TO LABELPRINTER LP-50
RS232 communication cable settings
Select baudratre and communication protocoll F5
Turn off the balance.
Hold down the "tare" key and press "on/zero" key (the display shows F5).
Press "tare" key until F4 appears.
Press 4 x the key "tare" (display shows F5).
Press "mode" key and select UTP mode.
Be sure the display shows UTP.
Press "tare" key to save the data.
Label Format select. F8
Turn off the balance.
Hold down the "tare" key and press "on/zero" key (the display shows F5).
Press "tare" key until F4 appears.
Press 6 x the key "tare" (display shows F8).
Press "mode" key and select the correct format. (normal Form.0)
Be sure the display shows the right choice.
Press "tare" key to save the data.
Select the quantity labels for each weighing. F12
Turn off the balance.
Hold down the "tare" key and press "on/zero" key (the display shows F5).
Press "tare" key until F4 appears.
Press 8 x the key "tare" (display shows F12).
Press "mode" key (the display shows COPY1)
Be sure the display shows the right choice.
Press "tare" key to save the data.
© RIBA WEEGTECHNIEK BV
On Scale 2
On 2
Computer
Press "mode" key to select the 9 formats
The formats you can make with the CD Rom on the computer.
Press "mode" key to change the number (max 9)
3 5
3 5
* br 48 (baud rate = 4800)
* br 96 (baud rate = 9600)
* br 192 (baud rate = 19200)
* UTP (connection with UWE Labelprinter LP-50)
22