Adjusting The Balance; Keyboard & Display - RIBA R-75 Handbuch

Adjusting the balance:

When you have a standard weight (available with your
supplier) you can adjust the balance yourself:
* Turn off the balance.
* Take away the protective flap on the bottom of the scale
* Turn on the scale and press the small key 1 time
* "C--15 " appears on the display.
* Press 3 times "Tare" key
* "L 0.0 Kg " appears on the display.
* Press "Tare" key The display tells you to put the appropriate adjusting weight on the scale and
confirm with "Tare" button
* Place the following weight and confirm with "Tare" key, place the final weight and confirm again with
press "Tare"key.
The menu is now complete and the calibration is complete.
Note:
Do not shake the balance
Note:
Keyboard & Display:
Tare
Kg/Ib
© RIBA WEEGTECHNIEK BV
(Zero) Scale is in Zero mode
Scale is in Tare mode
Low Voltage
(Stable) : Scale is in stable mode.
Indicates the current measuring units in weighting mode.
20