RIBA ZS Handbuch Seite 26

Program Date and Time F15 (The Labelprinter has to be connect.)
Turn off the balance.
Hold down the "tare" key and press "on/zero" key (the display shows F5).
Press "tare" key until F4 appears.
Press 9 x the key "tare" (display shows F15).
Press "mode" key (the display shows the date)
Format off the date 2 numbers mounth 2 number for the day and 2 numbers for the year.
When the date is set, press 4 seconds the "MODE" key
The display shows the time now..
Program the corrert time with the keys written in the above lines
Be sure the display shows the right choice.
Press "tare" key to save the data.
Using the backlight, yes or no:
Press 1 x "mode" key to turn the backlight (light in the display) off or on.
Select Filter F6 ( to set the weighing speed)
Turn off the balance.
Hold down the "tare" key and press "on/zero" key (the display shows F5).
Press "tare" key until F4 appears.
Press 5 x the key "tare" (display shows F6).
Press "mode" key and make filter choisse. (nomal Filt.0)
Be sure the display shows the right choice.
Press "tare" key to save the data.
© RIBA WEEGTECHNIEK BV
With the keys written on the next lines you can change the numbers.
MODE key is one position to the right
ON/ZERO key is to change the numbers
* Filt.0 = standaard
* Filt.1 = standaard
* Filt.2 = standaard
23