Troubleshooting; Protecting The Environment; Technical Data - Black+Decker BDCHD18 Übersetzung Der Originalanleitung

Troubleshooting

Problem
Unit will not start.
Battery pack will not
charge.
Unit shuts off abruptly.
Maintenance
Your BLACK+DECKER tool has been designed to
operate over a long period of time with a minimum
of maintenance.
Continuous satisfactory operation depends upon
proper tool care and regular cleaning.
Your charger does not require any maintenance
apart from regular cleaning.
Warning! Before performing any maintenance on
the tool, remove the battery from the tool. Unplug
the charger before cleaning it.
♦ Regularly clean the ventilation slots in your
tool and charger using a soft brush or dry
cloth.
♦ Regularly clean the motor housing using
a damp cloth. Do not use any abrasive or
solvent-based cleaner.
♦ Regularly open the chuck and tap it to remove
any dust from the interior.

Protecting the environment

Separate collection. Products and
batteries marked with this symbol must
not be disposed of with normal household
waste.
Products and batteries contain materials that can
be recovered or recycled, reducing demand for
raw materials.
Please recycle electrical products and batteries
according to local provisions. Further information
is available at www.2helpU.com
Downloaded from www.Manualslib.com
Possible cause Possible solution
Battery pack not Check battery pack
charged. charging requirements
Charger not plugged in. Plug charger into
a working outlet.
Surrounding air Move charger and
temperature too hot or battery pack to
too cold. a surrounding air
temperature of above
40 degrees F (45ºC) or
below 105 degrees F
(+40.5ºC)
Battery pack has Allow battery pack to
reached its maximum cool down.
thermal limit.
Out of charge. (To Place on charger and
maximize the life of allow to charge.
the battery pack it is
designed to shutoff
abruptly when the
charge is depleted
manuals search engine

Technical data

Voltage V
DC
No-load speed Min -1
Max. torque Nm
Chuck capacity mm
Max Drilling capacity
Steel/wood/Masonary mm
Weight kg
Charger
Input voltage V
AC
Output voltage V
DC
Current mA
Approx. charge time Hours
Charger
Input voltage V
AC
Output voltage V
DC
Current mA
Approx. charge time Hours
Charger
Input voltage V
AC
Output voltage V
DC
Current Amp
Approx. charge time Hours
Battery
Voltage V
AC
Capacity Ah
Type
Battery
Voltage V
AC
Capacity Ah
Type
Battery
Voltage V
AC
Capacity Ah
Type
Level of sound pressure according to EN 60745:
Sound pressure (L ) 88.7 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L ) 99.7 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
Drilling into metal (a , ) <0.45 m/s
h D
Screwdriving without impact (a ) <1.2 m/s
h
1.5 m/s 2
ENGLISH
BDCHD18
18
0-360/0-1400
17.5/40
1-10
10/25/10
0.90 (with battery 1.30)
905898**
230
18
200
8 - 20
905902**
230
18
400
4 - 10
905998**
230
18
1
1.5 - 4
BL1518
18
1.5
Li-Ion
BL2018
18
2.0
Li-Ion
BL4018
18
4.0
Li-Ion
, uncertainty (K) 1.5 m/s
2 2
, uncertainty (K)
2
9