Fsa 740 Edition; Operating The Fsa System Software; Speed Symbols; Software-Installation - Bosch FSA 740 Edition Originalbetriebsanleitung

en

24 | FSA 740 Edition |

5.7

Operating the FSA system software

You can operate the FSA system software via using the
function keys and buttons on the PC keyboard, the USB
mouse or the remote control.
i
Please note that:
$
the keyboard must always be connected to the
PS2 socket on the remote-control receiver.
$
the channel setting must always be configured
first before operating the remote control (see
1 689 989 312).
The ESC and <F1> to <F12> function keys are hardkeys
and softkeys:
R
Hardkeys (<ESC>, <F1>, <F10>, <F11> und <F12>)
are buttons with permanent functions. These keys
retain the same functions in all program steps.
R
Softkeys (<F2> to <F9>) are keys with alternating
functions. The functions for these keys change de-
pending on the selected test step.
The softkeys are described in the Online Help.
R
If a hardkey or softkey is "greyed out" in a program
step, it has no function.
R
You can select hardkeys and softkeys using the
mouse, keyboard or remote control.
Information on how to operate the FSA system software
is available in the Online Help.
List of buttons and hardkeys on the keyboard and remote control
Function
Display online help for current test step.
End current measurement or program.
Change from any Bosch application to the diagnostics software selection (DSA).
You can use the DSA to call up the various Bosch applications and enter customer data,
for example.
One step back.
One step forward or confirm the information.
Move to different buttons, registers or input fields.
Move within a button, a register or a list field.
Prints out a copy of the current screen display on a protocol printer at any point
in the program.
Exception: online help
1. Right click with the mouse.
2. Select "Print".
One step forward or confirm the information.
1 689 989 089 | 2018-03-24
5.8

Speed symbols

When measuring speed, the FSA system software se-
lects the best speed source automatically.
The selected speed source is displayed in the status bar
on the screen.
Clamp 1 or TD/TN
Trigger clamp
Clip-on sensor
Battery ripple
Current clamp
5.9 ESI[tronic]
i
Each current version of ESI[tronic] is included in the
delivery specification of the DVD. Before you can
operate ESI[tronic], you must first install and re-
lease the software. You will find a description of the
ESI[tronic]-installation and ESI[tronic]-connection
procedure on the "ESI[tronic] DVD 1 Diagnosis and
Technology" in the directory 'DOCS\SETUP\INFO_
XXX.PDF'.
5.10 Software installation
Perform software installation via the diagnostics soft-
ware access (DSA). Note installation information on
each respective CD/DVD.
Remote control
F1
O
J
Z
V


D
E
Keyboard
<F1>
<ESC>
<F10>
<F11>
<F12>
TAB button
Cursor buttons
Print button
Enter button
Robert Bosch GmbH