FUSE REPLACEMENT (220-240V UNIT ONLY)
Mains - located in the rear of the unit inside the inlet socket.
1.
Turn the power switch OFF.
3. Remove fuse drawer from inlet socket
(contains 2 fuses) using small screwdriver
to push on the locking clip.
5. Replace fuse(s) with supplied
F 250V 10A fuse(s).
7. Plug Unit power cord into AC power inlet.
2. Unplug the power cord from AC power inlet.
4 Remove fuse drawer.
6. Push fuse drawer into inlet socket until
the clip locks.
8. Turn Power Switch to ON position.
13