Dentsply Sirona inLab Speedcure 9494800 Bedienungsanleitung Seite 10

GENERAL OPERATION (CONTINUED)
COOLING SCREEN
Once cooling is completed, the display will return to the process menu. The last process used will be
highlighted on the process menu. Do not remove the appliance until the cool cycle has ended.
!
CAUTION: Models may still be hot - Use caution when removing materials from chamber.
ABORT PROCESS
When the START/STOP key has been pressed during a process, the following screen is shown to confirm the
aborting of the process.
ABORT PROCESS SCREEN
ESC cancels the abort command.
ABORT PROCESS COOLING SCREEN
If START/STOP was pushed or the door was opened during the process, a long beep will sound and the
cooling screen above will be shown.
Remove appliance only after the cooling cycle has ended.
!
CAUTION: Models may still be hot - Use caution when removing materials from chamber.
8