Beyerdynamic UNITE CDD-8/4 Kurzanleitung Seite 5

Unite CDD | CDS Cockpit Charger | Unite DS Basic Charger
Humidity / heat sources
• Never expose the equipment to rain or a high level of humidity. For this reason do not install it in the
immediate vicinity of swimming pools, showers, damp basement rooms or other areas with unusually high
atmospheric humidity.
• Never place objects containing liquid (e.g. vases or drinking glasses) on the equipment. Liquids in the
equipment could cause a short circuit.
• Do not install near any heat sources such as radiators, heat registers, stoves or other device (including
amplifiers) that produce heat.
Connection
• The equipment must be connected to a mains socket that has an earth contact.
• Protect the power cord by not walking or standing on it or pinching, this is considered for plugs especially
where they exit from the device.
• Lay all connection cables so that they do not present a trip hazard.
• Whenever working on the equipment switch off all inputs and outputs to the power supply.
• Check whether the connection figures comply with the existing mains supply. Serious damage could
occur due to connecting the system to the wrong power supply. An incorrect mains voltage could
damage the equipment or cause an electric shock.
• If the equipment causes a blown fuse or a short circuit, disconnect it from the mains and have it checked
and repaired.
• Do not hold the mains cable with wet hands. There must be no water or dust on the contact pins. In both
cases you could receive an electric shock.
• The mains cable must be firmly connected. If it is loose there is a fire hazard.
• Always pull out the mains cable from the mains and/or from the equipment by the plug – never by the
cable. The cable could be damaged and cause an electric shock or fire.
• Do not use the equipment if the mains plug is damaged.
• If you connect defective or unsuitable accessories, the charger could be damaged. Only use power
supply units available from or recommended by beyerdynamic.
5