Beyerdynamic UNITE CDD-8/4 Kurzanleitung Seite 19

Unite CDD | CDS Cockpit Charger | Unite DS Basic Charger
5.3.1 Conditioning the battery
• In order to achieve the maximum capacity of the battery, we recommend discharging the transmitters /
receivers completely to carry out a complete charging cycle afterwards.
• This also increases the accuracy of the battery indicator on the display of the Unite transmitters / receivers.
5.4 Automatic Firmware Update with Unite CDD-8/4 and CDS-4/2
• By using the Unite Cockpit charger you can upload firmware updates to Unite transmitters / receivers.
• The Unite Cockpit desktop charger is factory set with the latest firmware for transmitter / receiver at the time
of delivery. If you charge transmitters / receivers with older firmware with the charger, the firmware is also
automatically updated. This ensures that the charger will work properly with the transmitter / receiver.
• During the firmware update the status indicator light of the Unite transmitters/receivers will illuminate red.
This process will take approx. 5 minutes. During the firmware update do not disconnect the charger from
the mains. Should the process take longer than 10 minutes, turn the Unite Cockpit charger off and on again.
The update process will then restart.
• You can check the update on the transmitter / receiver:
System
Open the "System"
menu with the
on/off and menu
button.
System
Information
Select the "Device"
Select the
"Information"
submenu.
Information
Firmware Version: xxxx
Device
The firmware
submenu.
version is displayed
19
Device