Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Guidelines - WMF Kult Pro Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für Kult Pro:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

Safety guidelines

▪ Attach the device only to a correctly-installed earthed plug socket.
Inlets and plugs must be dry.
▪ Do not draw or jam the power supply cord through sharp edges, do
not allow it to hang loose, and protect it from heat and oil.
▪ Do not place the device on hot surfaces (stove tops, etc.), and do
not operate it close to open flames.
▪ Do not pull the power plug from the plug socket by its cord or with
wet hands.
▪ If the rotating filter (microfilter) is damaged, the device should
not be operated.
▪ Do not reach into the device during operation.
▪ Make sure to also keep (for example) long hair away from the filler
hole.
▪ Do not put any articles (spoons, etc.) into the filler hole when the
device is in operation..
▪ Do not move the device during operation.
▪ Do not remove the pulp container during operation.
▪ Warning! The edges at the base of the filter are sharp.
▪ The device is not suitable for cutting up or grating nuts, chocolate
or similar ingredients.
▪ Prior to the replacement of accessories or attachments that move
during operation, the device must be switched off and separated
from the mains.
▪ Do not operate the device, or immediately pull out the power plug,
if:
the device or the mains cable is damaged
you suspect a defect after a fall, etc..
In any such case, the device should be sent for repair.
▪ The power plug must be pulled out:
upon any malfunction during operation
prior to any cleaning or care
after use.
▪ We assume no liability for possible damage as a result of misuse,
incorrect operation or repair not undertaken by a professional. In
any such case, a warranty service is also not provided.
▪ The device is not intended for commercial use.
▪ The appliance is designed for indoor household use only.
▪ The maximum continuous operating time at high speed is 30
minutes.
▪ Allow the motor to cool down completely between two consecutive
uses.
11

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

16090011

Inhaltsverzeichnis