Getting Started - WMF Kult Pro Gebrauchsanweisung

Getting started

Before using the device for the first time, clean all removable parts.
Make sure not to injure yourself on the sharp blades.
Switch the rotary knob to 0 to turn off the device.
Take the required length of the power supply cord from the back of
the device.
Insert the filter bowl into the device.
Insert the microfilter into the filter bowl. Make sure that the microfil-
ter audibly snaps into place on the drive axle.
Prior to any use, ensure the microfilter is not damaged.
If you find tears or other damages, you should not use the device until
the microfilter is replaced.
Insert the pulp container by slightly tilting it forward.
First, attach the upper side to the motor base, and then shift the lower
side onto the device.
To empty the pulp container, switch the device off and carefully
remove the pulp container.
Warning: Do not operate the device without the pulp container
inserted.
Place the cover with the filler hole on the device. Then press the safety
interlock upward, until this audibly snaps into place.
13