Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance, Overhaul, Repair; Maintenance; Overhaul; Repair - Stahl HART Serie Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Maintenance, Overhaul, Repair

EN
11
Maintenance, Overhaul, Repair
EN
EN

11.1 Maintenance

• Consult the relevant national regulations to determine the type and extent of
EN
inspections.
EN
• Adapt inspection intervals to the operating conditions.
EN
EN
During maintenance of the device, check at least:
• whether the clamping screws holding the electric lines are securely seated,
EN
• whether the device enclosure and / or protective enclosure have cracks or other
EN
visible signs of damage,
EN
• whether the permissible ambient temperatures are observed,
• whether the device is used according to its designated use.
EN
EN

11.2 Overhaul

EN
The device does not require regular maintenance.
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN

11.3 Repair

EN
EN
22
HART Analog Universal Module
for Zone 1 / Div. 1
Series 9468/32
If the blue "M/S" LED lights up continuously, it is recommended to replace
the module in the near future. Otherwise the likelihood of failure will increase
after 12 months (see the "Indications" and "Troubleshooting" sections).
Observe the relevant national regulations in the country of use.
Explosion hazard due to improper repair!
Non-compliance results in severe or fatal injuries.
• Repair work on the devices must be performed only by
R. STAHL Schaltgeräte GmbH.
DANGER
218078 / 946860310010
2018-10-19·BA00·III·en·02

Werbung

Kapitel

Inhaltsverzeichnis

Fehlerbehebung

loading

Diese Anleitung auch für:

9468/32-08-11 aumh 08

Inhaltsverzeichnis