Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
B's Recorder/B's CLiP
Notes During Use
Disc cover opens automatically
•
When B's Recorder is finished writing, the disc cover opens automatically. You can
change the settings for B's Recorder so that the disc cover does not open automati-
cally. If you select [OK] after writing, however, the disk cover will open regardless of
the settings.
To format disc using B's CLiP
•
Right-click
Discs formatted or written using methods other than B's CLiP cannot be used.
•
After formatting the disc, if the disk does not mount (is not recognized), remove it, and
insert it again.
•
Eject the formatted disks as described below.
When ejecting the disc while
•
Right-click
Only eject discs as described above.
•
If you cannot eject the disc even after attempting the operation described above, shut
down Windows and after the power is off, slide the emergency open lever (
10 (D)) and open the disc cover.
Even when the data saving has been finished by B's CLiP, data will continue to be saved
on the drive for another 15 seconds. (The indicator will light several times.) Before pro-
ceeding with the next operation, check that the indicator lights up green.
To disable B's CLiP when it is not used
•
Make the settings following the steps below.
1
Log on to Windows with the administrator authority.
2
Windows XP
Select [start] - [All Programs] - [B.H.A] - [B's CLiP] - [B's Config].
Windows 2000
Select [Start] - [Programs] - [B.H.A] - [B's CLiP] - [B's Config].
3 Add a check mark for [Disable B's CLiP] at [System Configuration], and select [OK].
4 When a message appears asking if you want to restart your computer, select [Yes].
To start using B's CLiP again, remove the check mark from [Disable B's CLiP] using
step 3 described above, and select [OK].
If "B's Recorder" or "B's CLiP" has been deleted, reinstall it. (
26
or
and then select [Format].
is displayed on the taskbar
and select [Eject].
page
page 20)
Werbung
Inhaltsverzeichnis
