Bestway LAY-Z-SPA Bedienungsanleitung Seite 11

package.
• Please keep at least 1m clearance around the spa.
• Consult your local government authority for water
regulations related to convenient water supply for filling the
spa.
• Recommended to consult experts and/or local authorities to
apply local or national laws/regulations relating to childproof
fencing, safety barriers, lighting, and other safety
requirements.
• Do not put the cover on the ground or any other dirty
surface when not in place on the spa.
• When the spa is being used, the cover should be placed in
a clean, dry area, otherwise it can pick up dirt and bacteria.
Covers should not be put on wooden tables or wooden
decking because of the risk of bleaching the wood. A cover
lifter, or similar device, is useful for ensuring that the cover
does not come into contact with the ground. A cover lifter is
strongly recommended for spas in rental settings.
IMPORTANT: Because of the combined weight of the
Lay-Z-Spa, water, and users, it is extremely important that
the base where the Lay-Z-Spa is installed is smooth, flat,
level and capable of uniformly supporting the weight for the
entire time the Lay-Z-Spa is installed (not on the carpet or
other similar material). If the Lay-Z-Spa is placed on a
surface, which does not meet these requirements, any
damage caused by improper support is not covered under
the manufacturer's warranty. It is the responsibility of the
Lay-Z-Spa owner to assure the integrity of the site at all
times.
1. Indoor Installation:
Be aware of special requirements if you install the spa
indoors.
• Humidity is a natural side effect with Lay-Z-Spa installation.
Determine the effects of airborne moisture on exposed
wood, paper, etc. in the proposed location. To minimize
11