Num'axes PIE 1009 Gebrauchsanleitung Seite 18

Now press the
will take you to "Video length". Try using the
settings for the length of each video clip the camera shoots.
Video length
Pressing the
Press OK to enter. Press
parameters back to their original factory default settings.
Factory setting
Download the PC-Software
Be sure to set the current date and time ("Set clock" parameter) since the time and date will be
imprinted on every photo/video if you choose the "On" setting for the "Time stamp" parameter.
To exit a menu or move back, press the MENU key.
5.3.2.
Put the power switch in the TEST position then press the OK key to manually capture a photo or
record a video. Press the OK key to stop recording the video.
5.3.3.
− Put the power switch in the TEST position.
− Press
LCD screen of the camera).
− Use the
(you will hear audio from the speaker during playback).
− To exit image review mode, press the OK key.
PIE1009 – indice A
Downloaded from www.Manualslib.com
key to move to another parameter in the Menu. Pressing it four times
10s
Beep sound
ON
Set clock
Enter
Fixed time
OFF
key several more times will get you to the "Factory setting" parameter.
Enter
Enter
Version
Enter
Manual capturing
View images or videos on the camera LCD screen
to enter image review mode (the latest image or video clip will be shown on the
and keys to scroll through your photos or videos. Press  to play a video
manuals search engine
and  keys to scroll through the range of
to highlight OK then press the OK button to restore all
Video length
20s
Beep sound
ON
Set clock
Enter
Fixed time
OFF
Return menu setting
to defaults
Cancel
OK
18/60