Siemens the probe Betriebsanleitung Seite 4

Mounting
Threaded
The Probe is available in three thread types:
2" NPT, 2" BSP or PF2.
Flange Adapter (optional)
The Probe can be fitted with the optional 75 mm
(3") flange adapter for mating to 3" ANSI, DIN
65PN10 and JIS 10K3B flanges.
Sanitary
• mount The Probe onto the top of
• secure mating by surrounding
• tighten adjusting wing nut
Note:
ferrule must be smooth, free of
burrs, seams or ridges.
Page 2
Downloaded from www.Manualslib.com
Mount The Probe so that the face of the sensor is at least 25 cm above the highest
Note:
anticipated level.
Before inserting The Probe into its
Note:
mounting hole, ensure that the threads are of
the same type to avoid damaging The Probe
threads.
• Mount The Probe so that the face of
Notes:
the sensor is at least 25 cm above
the highest anticipated level.
• The Sanitary Probe 3A approval is
for chemical clean-in-place
applications to 60 °C (140 °F) only.
Ensure your cleaning chemicals are
compatible with PVDF.
the tank's sanitary ferrule
the joint with the clamp
Inside of sanitary
The Probe – INSTRUCTION MANUAL
manuals search engine
hinged lid
7 mm
84 mm
(0.3")
(3.3") max.
117 mm
(4.6F")
cable entry
'knock out'
279 mm
(11")
87 mm
(3.4") ø
74 mm
mounting
(2.9")
thread
53 mm
61 mm
(2.4")
ø max.
optional
The Probe
flange
adapter
7 mm
hinged lid
(0.3")
(3.3") max.
117 mm
(4.6")
cable entry
'knock out'
279 mm
(11")
87 mm
(3.4") ø
76 mm
integral
(2.9")
sealing ring
61 mm
(2.4")
Sanitary Ferrule,4" FDA Approved
The Probe
(US Food and Drug Administration)
clamp
adjusting
wing nut
ferrule
tank
119 mm (4.68")
97 mm (3.83")
dimensions are approximate
electronics
mounting
thread
sensor
(2. 1 ")
84 mm
electronics
mounting
thread
sensor
53 mm
(2. 1 ")
ø max.
7ML19985GD61