11- Plant Running Time; 12- Viewing The Temperature Level Values - Bpt TH 345 Gebrauchsanweisung

TH345.01 ITF 24078822 04_06
The days are counted including the
day during which the program-
ming option is used (so the
remainder of the day when the set-
ting is made counts as a whole
day).
Note. To return to AUTOMATIC
mode before the expiry of the pro-
grammed interval, press the
button, figure 57.
11 - PLANT RUNNING
TIME
The THERMOPROGRAM is com-
plete with an hour-counter (up to
1 2 3 4 5 6 7
T3
T2
T1
0 4 8 12
24
GB
Downloaded from www.Manualslib.com
9,999) which enables you to keep a
count of the plant running times.
11.1 - To check this value, bring
the thermostat into MANUAL
mode by pressing the
figure 58, remove the thermostat
from its housing and then press
the C button, figure 59.
For 5 s, the display indicates the
number of plant running hours.
To zero the counter and begin a
new count, press the
while the digits are visible.
11.2 - Replace the thermostat in
its housing.
ON
T3
T2
T1
16 20 0
Fig. 57
manuals search engine
11-07-2007
button,
1 2 3 4 5 6 7 ON
4 8 12 16 20
8:21 Pagina 24
12 - VIEWING THE
TEMPERATURE
LEVEL VALUES
12.1 - Remove the thermostat
from its housing.
12.2 - Press button T, figure 60.
The display shows the temperature
band for T1 and the temperature
assigned to T1 is indicated instead
of the room temperature.
button
12.3 - Press the button T again,
figure 61, to view the value of the
next temperature level.
12.4 - After viewing the tempera-
ture level assigned to T3, press
R T
Fig. 58
1 7 C
0 23
Fig. 59