Check now
Starts search for software updates immediately.
16.7. Setup wizard
Starts the setup wizard as described in the section 'Using the device for the first
time' .
16.8. Info
This section displays the software version and the device's radio ID.
16.9. Backlight
You can adjust the display lighting with this function:
− Dim the display in standby mode after a specified time
− Display brightness
Set dimming time
Select the entry TIMEOUT and then turn the OK dial to select ON, 10, 20,
30, 45, 60, 90, 120 or 180 seconds.
Display brightness during operation
Select the entry POWER ON LEVEL by turning and then pressing the OK
dial and then set the desired brightness level to HIGH, MEDIUM, or LOW.
168 of 180
Downloaded from
www.Manualslib.com
manuals search engine