Setting The Time And Date; Maintain Network Connection; Select Wlan Region; Establishing A Connection To A Network - Medion LIFE P85025 Bedienungsanleitung

10.2. Setting the time and date

In the 12/24-STUNDENFORMAT 12 or 24.
•
• Specify whether the time is to be set automatically via DAB reception (UP-
DATE FROM DAB), FM reception (UPDATE FROM FM) or via the net-
work (UPDATE FROM NET).
UPDATE VIA NETWORK
If you have selected the option "UPDATE FROM NET", proceed as follows:
 In the next query window set your time zone.
 Then set the automatic setting of summer/winter time to ON or OFF.
NO UPDATE
 If you have selected the last option (NO UPDATE), set the time manually as
follows:
 The digits indicating the date will flash. Use the OK dial
to set the day and then press it to confirm.
 The digits indicating the month will flash. Use the OK
dial to set the month and then press it to confirm.
 The digits indicating the year will flash. Use the OK dial
to set the year and then press it to confirm.
 The digits indicating the hours will flash. Use the OK dial to set the hour and
then press it to confirm.
 The digits indicating the minutes will flash. Use the OK dial to set the minutes
and then press it to confirm.

10.3. Maintain network connection

 If the network connection is to be maintained even in standby mode or opera-
tion modes which do not require WLAN (AUX IN, DAB radio, FM radio, USB play-
back), select the setting YES . If you select the setting NO , the network con-
nection is re-established when the Internet radio is switched back on from the
standby mode.

10.4. Select WLAN region

 Select the region in which you are operating the Internet radio.
The device will then start searching for available WLAN networks (access points).

10.5. Establishing a connection to a network

Any networks found will be listed by their name (SSID). WLAN access points which
provide a connection over WPS are displayed with [WPS].
Below these you will see the entries:
RESCAN: start a new search
WIRED: search for networks via Ethernet
MANUAL CONFIG.: enter the connection data manually
152 of 180
Downloaded from www.Manualslib.com manuals search engine
Set Time/Date
01-01-2010
11:42