Philips hr 1737 Gebrauchsanweisung Seite 6

• To crush ice cubes, drop them onto the blades
through the opening in the lid while the motor is
running.
• If you are processing solid and liquid
ingredients at the same time, first put the liquid
ingredients in the jar. Add the solid ingredients
while the appliance is running.
Mill (only type HR 1737)
Preparing the mill for use
- Put the ingredients in the beaker (fig. 13).
Process only dry ingredients. Do not fill the
beaker beyond the "MAX" indication.
- Place the rubber ring on the blade unit (fig. 14).
- Screw the blade unit onto the beaker (fig. 15).
If this requires some effort, moisten the rubber
ring with a drop of water.
- Turn the assembled mill upside down and
screw it onto the motor unit (fig. 16).
- Preferably use the mill at pulse position M.
What to use the mill for?
The mill is suitable for grinding and chopping e.g.:
Ingredients
- peppercorns
- sesame seeds
- rice, wheat
- soy beans
- dried peas
- coconut flesh
- coffee beans
- cheese
- breadcrumbs
- sugar cubes
- nuts (shelled)
(Optimal results are achieved if you process the
quantities mentioned)
Storage and sprinkling facilities
After you have processed the ingredients, you
can unscrew the mill from the appliance.
If you remove the blade unit and replace it with
the lid (fig. 17), you can store the ingredients, for
instance in the refrigerator. You can also sprinkle
the ingredients onto a dish via the reclosable
sprinkling hole in the lid. Handy for on the table!
Filter
With this filter you will make delicious fresh fruit
juices and cocktails in next to no time. All pips
and skins will remain behind in the filter.
Quantities
25-75 g
25-75 g
25-75 g
25-75 g
25-75 g
25-75 g
25-75 g
25-75 g
one dried slice of bread
50 g
25-75 g
Preparing the filter for use
- Assemble the blender jar.
- Put the filter in the assembled blender jar
(fig. 18). Make sure that the grooves of the filter
fit exactly onto the ribs inside the blender jar.
- Put the lid in place and turn it to fix the filter
(fig. 19).
- Put the ingredients in the filter (fig. 20).
Note: the filter should never be filled beyond its
metal part!
- Add water or another liquid (e.g. for cocktails).
- Put the stopper in place and switch the
appliance on. Select the highest speed. Let the
appliance run for 40 seconds.
- Switch the appliance off. Pour out the drink
through the spout of the blender jar (fig. 21).
- For optimal results, put the jar with the
remaining ingredients back onto the appliance
and let it run for a few more seconds.
- Pour out the rest of the drink.
Tips
Particularly when you are processing large
quantities, we advise you not to put all the
ingredients in the filter at the same time. Start
processing a small quantity, let the appliance run
for a moment, switch it off and then add another
small quantity. Repeat this procedure until you
have processed all the ingredients.
For soy milk
- Soak soy beans for 4 hours before processing
them.
- Max. 50 g of dry soy beans can be processed
with max. 500 ml water.
For fruit juices and cocktails
- For the best results, add approximately 300 ml
water (or other liquid for cocktails, etc.) to
150 g fruit.
Cleaning
• Cleaning of the appliance, its parts and the
accessories is easiest immediately after use.
• Never clean the accessories or the parts in the
dishwasher.
- The motor unit can be cleaned with a moist
cloth. Do not use abrasives, scourers, alcohol
etc.
Blender
- Quick cleaning: assemble the blender jar and
pour lukewarm water and some washing-up
liquid into the blender jar.
- Assemble the lid and the stopper.
6