Herunterladen Inhalt Inhalt Diese Seite drucken

V2 CITY1-EVO Kurzanleitung Seite 27

Digitale steuerung (230v) für flügel und schiebetore
Vorschau ausblenden Andere Handbücher für CITY1-EVO:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 74
PARAMETER
VALUE
Pot1
30 - 100
Pot2
30 - 100
rA.AP
no
1 - 50
rA.Ch
no
1 - 50
St.AP
PAUS
ChiU
no
St.Ch
StoP
APEr
St.PA
ChiU
no
PAUS
SPAP
PAUS
ChiU
no
DESCRIPTION
Motor M1 power
The displayed value is the percentage of max. motor power.
m
WARNING: In case an hydraulic motor is used, set value
100
Motor M2 power
The displayed value is the percentage of max. motor power.
m
WARNING: In case an hydraulic motor is used, set value
100
Slow down in opening
Function deactivated
This menu allows regulating the percentage of the ride/drive that is
carried out at reduced speed during the last opening stretch
Slow down in closing
Function deactivated
This menu allows regulating the percentage of the ride/drive that is
carried out at reduced speed during the last closing stretch
Start command during the opening phase
This menu allows fixing the control unit conduct in case it receives a
Start command during the opening phase
The gate stops and goes to pause
The gate immediately starts closing
The gate go on with the opening phase (command is ignored)
Start command during the closing phase
This menu allows fixing the control unit conduct in case it receives a
Start command during the closing phase
The gate stops and its cycle is considered as finished
The gate opens again
Start command during the pause
This menu allows fixing the control unit conduct in case it receives a
Start command when the gate is open during its pause phase
The gate starts closing
Command is ignored
Ch.AU
The pause time is reset (
Pedestrian Start during the partial opening phase
This menu allows fixing the control unit conduct in case it receives a
Pedestrian Start command during the partial opening phase.
m
WARNING: a Start command in any phase of partial
opening will cause the total opening; the Start Pedestrian
command is always ignored during a total opening.
The gate stops and goes to pause
The gate immediately starts closing
The gate goes on with the opening phase (command is ignored)
)
- 25 -
AntE SCor
MEMO
60
60
60
60
25
15
25
15
PAUS PAUS
StoP StoP
ChiU
ChiU
PAUS PAUS

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis