Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.
Operating instruction 1
Reader on IK3 EU BUS-2 / DCM up to V10.xx
and IK3 EU conventional
For IK3 EU BUS-2 / DCM from V11.xx see Chapter 7
"Operating instuction 2".
6.1
Operating and indication elements
LED indication
LED yellow
LED green
LED red
Arming
Disarming
The state of the indicator is as follows:
6.2
Acoustic acknowledgement
There is an acoustic acknowledgement
by a long buzzer signal.
There is no differentiation between a positive or negative
reading acknowledgement.
6.3
Learning mode for data carriers
Learning mode is possible only in the
In learning mode it is simple to authorize new data carriers or delete
existing ones. Newly "learned" data carriers automatically receive
general authorization
as of version V9 (MB24/48/100) and version V3
(MB256 plus) the PINs / authorizations /time zones must be assigned
afterward via the programming functions.
To start the learning mode, you need a "
carrier set up exclusively for this purpose in the system. However, the
learning key has no authorizations.
As long as learning mode is activated, you can enter or delete as many
data carriers as you want one after another.
Visual acknowledgement:
The "Disarmed" indicator (yellow LED) and
the "Ready" indicator (green LED) serve as a visual acknowledgement
signal in learning mode.
Buzzer signals:
Learning mode activated or data
carrier learned.
Data carrier erased
Invalid action.
An invalid action is given if a
programmed data carrier is to be
learned or an unprogrammed data
carrier is to be erased.
Meaning:
Disarmed
Ready
Alarm
Numerical keypad
When idle, all indicators remain dark.
When a function is being performed,
the indicator is actuated for approx. 5
seconds according to the function.
For details see following Chapters.
on
off
1 sec.
disarmed state
learning key
". This is a data
single signal
twice signal
triple signal
6.3.1 Readers with keypad
Start learn mode
Hold the learning key in the reading field until
L
buzzer signal
LEDs yellow and green light up
Press the " " key short buzzer signal
#
LEDs yellow and green are flashing,
the learning mode is activated
Learn data carrier
Hold the new data carrier in the reading field
ID
until buzzer signal
LED yellow flashes, LED green is on
#
Press the " " key short buzzer signal
LEDs yellow and green are flashing
Delete data carrier
Hold the old data carrier in the reading field until
ID
buzzer signal
LED yellow flashes, LED green is on
*
Press the " " key, 2 short buzzer signals
LEDs yellow and green are flashing
Quit learn mode
*
L
or
flashing
Exits automatically approx. 60 seconds after the last operation
LEDs yellow and green off
6.3.2 Readers without keypad
Start learn mode
Hold the learning key in the reading field until
L
buzzer signal
LEDs yellow and green light up
LEDs yellow and green are flashing,
the learning mode is activated
Learn data carrier
Hold the new data carrier in the reading field
ID
.
until buzzer signal
LED yellow flashes, LED green is on
LEDs yellow and green are flashingken
Quit learn mode
Hold the master key in the reading range
L
or
Exits automatically approx. 60 seconds after the last
operation
LEDs
6.4
Access control function
Door opening
Acknowledgement with AC function
Optical
Disarmed (yellow)
Ready (green)
Acoustical
(buzzer signal)
Action
I
,
I
,
0
Hold the learning key in the reading field until buzzer
signal, then press the
"0"
button
yellow and green off
- Hold data carrier in the reading range.
- Acknowledgement.
No authorization or
Authorized
AC function not activated
5 sec.
1 sec.
Acknowledegement
Time-controlled
door release
1 sec.
Acknowledegement
No door release
9
Werbung
