Battery-Powered Riveting Tool; Work Capacity; Equipment And Accessories - GOEBEL GO-100 Bedienungsanleitung

1. Battery-powered Riveting Tools
1.1

Work Capacity

Model GO-100 for standard blind rivets all materials dia 2.4mm up to 5.0mm
(3/32" up to 3/16")
Model GO-100+ for Triple Claw Blind Rivets dia 5.2mm up to 7.5mm
(3/16" up to 9/32")
Model GO-200 for high strength blind rivets all materials dia 4.0mm up to 6.4 mm
(5/32" up to 1/4")
(When setting rivets dia 2.4mm up to 3.2mm (3/32" up to 1/8") with GO-200
relevant nose pie ces and push pin set should be purchased separately
and replaced on tool)
1.2

Equipment and Accessories

1. nose pieces
3. hook
5. mandrel collector
7. trigger
9-11. accessories
Accessories
• Nose piece
• Nose piece
stored in tool kit
• Nose piece C – for riveting dia. 4.0mm ( 5/32" ) blind rivets , stored in tool kit
• Nose piece D – for riveting dia. 4.8/5.0mm (3/16") blind rivets equipped
on tool
• Wrench – for nose pieces changing
• Battery charger set
• Battery(s) 14.4V 1,4Ah/4-cell or/and 14.4V 2,8Ah/8-cell
A - for riveting dia 2.4mm (3/32")
B - for riveting dia 3.0/3.2 mm (1/8") blind rivets,
2. front sleeve
4. power illustration
6. warning light
8. battery
blind rivets, stored in tool kit
19