Herunterladen Diese Seite drucken

Balluff BSI R11A0-XXR-CXP360-S75G Betriebsanleitung Seite 13

Kapazitive einachsige neigungssensoren mit modbus-schnittstelle
Vorschau ausblenden Andere Handbücher für BSI R11A0-XXR-CXP360-S75G:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
BSI R11A0-XXR-CXP360-S75G
Capacitive uniaxial inclination sensor with Modbus interface
Read out inclination in a different range (input register)
With the "Inclination with indicator options" parameter, the
tilt angle is read out in the changed "Indicator area"
(register 136) and with changed direction of rotation
(register 135) in registers 17 or 18.
Read
Slave ID Function
Adress Quantity Checksum
Code
1 byte
04 Read
17
or
18
Read out sensor temperature (input register)
With the "Sensor temperature" parameter, the current
temperature of the sensor in register 10 is read out.
Read
Slave ID Function
Adress Quantity Checksum
Code
1 byte
04 Read
10
Maintenance
The device is maintenance-free. The housing can be
cleaned as needed using a damp cloth and non-corrosive
cleaning solution when the device is switched off.
Decommissioning
Always uninstall the device in a deenergized state.
Disposal
Observe the national regulations for disposal.
You can find more information at
www. balluff.com on the product page.
www.balluff.com
0x0002
2 bytes
0x0001
2 bytes
Technical data
General data
Measuring range
Measurement axes
Direction of rotation
Measuring principle
Protection class
Electrical data
Supply voltage U
S
Output
Frame type
Transmission rate
Cycle time min.
Process data cycle
Resolution max.
Residual ripple
Polarity reversal protected
Short-circuit protected
Sampling rate
Accuracy
(characteristic deviation)
at +10 °C to +40 °C
remaining temperature range
Lateral angle sensitivity
Current draw
Settling time
Mechanical data
Housing material
Dimensions
Weight
Connection plug connector
Ambient conditions
Ambient temperature range
Degree of protection as per
IEC 60529
360°
1
Clockwise and
counterclockwise
Capacitive
3
10 to 30 V DC
Modbus RS-485
RTU
COM 2 (19.2 kBaud)
can be set via register
201
20 ms at 19.2 kBaud
180 ms at 19.2 kBaud
±0.01°
< 0.01 %
Yes
Yes
< 150 ms
≤ ±0.1°
≤ ±0.15°
±0.1° at lateral tilt up
to max. 30°
< 20 mA
< 1 s
Aluminum
79×28×20 mm
Approx. 80 g
M8, 4-pin
–40 to +85 °C
IP67
english
6

Werbung

loading