Fault And Error Messages - Jung FRWM200 Betriebsanleitung

This is useful if you expect a spurious alarm in
your kitchen.
The smoke alarm device will not beep or give
help signals in these 10 minutes. Not even if
other smoke alarm devices in the same radio
group detect smoke.
The operation of the remaining detectors in
the radio group is not affected by this function.
EN
Operating Manual: FRWM200 – Smoke Alarm Device with Radio Link
12 Fault and error
messages
The device automatically checks its operational
readiness once a minute. The device displays
functional limitations in the form of error and
alarm messages.
If the device detects environmental influences
differing from the rule, it regulates the sensitivity
of its detection electronics automatically.
12.1 Error messages
The following messages are considered error
messages:
Battery error message
•
Contamination message
•
Alarm without cause of fire
•
Defective connection test of a radio group
•
DANGER
Danger from malfunction!
In the event of a battery error
message / contamination message, the
smoke alarm device may only continue
to provide its reliable warning perfor-
mance for max. 60 days.
f It is necessary to replace the smoke
alarm device before the remaining
60 days have passed.
67