CONTENTS
1.
1.1
1.2
1.3
2.
Safety �������������������������������������������������������� 16
2.1
Intended use ����������������������������������������������������� 16
2.2
2.3
Test symbols ����������������������������������������������������� 16
3.
3.1
Operation ��������������������������������������������������������� 16
4.
5.
6.
Safety �������������������������������������������������������� 17
6.1
6.2
6.3
7.
7.1
7.2
Accessories ������������������������������������������������������� 18
8.
Preparations ������������������������������������������������ 18
8.1
9.
Installation �������������������������������������������������� 18
9.1
9.2
9.3
9.4
Power supply ���������������������������������������������������� 19
10.
10.1
10.2
11.
Settings ����������������������������������������������������� 20
11.1
12.
Shutdown ��������������������������������������������������� 20
13.
13.1
14.
Maintenance ������������������������������������������������ 21
14.1
14.2
14.3
14.4
14.5
14.6
14.7
14.8
15.
Specification ������������������������������������������������ 22
15.1
15.2
15.3
15.4
14
| SHU 10 | SH 10 | SH 15
15.5
15.6
15.7
Data table �������������������������������������������������������� 25
GUARANTEE
ENVIRONMENT AND RECYCLING
SPECIAL INFORMATION
- The appliance may be used by children aged 3
and older and persons with reduced physical,
sensory or mental capabilities or a lack of expe-
rience and know-how, provided that they are su-
pervised or they have been instructed on how to
use the appliance safely and have understood the
resulting risks. Children aged 3 to 8 years may
only operate the tap connected to the appliance.
Children must never play with the appliance. Chil-
dren must never clean the appliance or perform
user maintenance unless they are supervised.
- When permanently connected to the power sup-
ply using a dedicated junction box, the appliance
must be able to be isolated from the mains power
supply by an isolator that disconnects all poles
with at least 3 mm contact separation.
- The power cable may only be replaced (for exam-
ple if damaged) by a qualified contractor author-
ised by the manufacturer, using an original spare
part.
- Secure the appliance as described in chapter "In-
stallation / Installation".
- Observe the maximum permissible pressure (see
chapter "Installation / Specification / Data table").
- Drain the appliance as described in chapter "In-
stallation / Maintenance / Draining the appliance".
- The appliance is pressurised. During the heat-up
process, expansion water will drip from the safety
valve.
- Install a type-tested safety valve, or safety as-
sembly containing such a safety valve, in the cold
water supply line.
- Regularly activate the safety valve to prevent
it from becoming blocked, e.g. by limescale
deposits.
www.stiebel-eltron.com