Maintenance - ARDES AR5EA23 Bedienungsanleitung

Instructions for use
5EA23
Place the fan on a flat, dry and stable surface, and insert the plug of the
fan in a socket. Select the desired speed by pressing the buttons on the
control panel (3):
0 = off 1 = minimum speed 2 = maximum speed
5EA30 / 5EA30W / 5EA40 / 5EA40W / 5AM30 / 5AM40
Place the fan on a flat, dry and stable surface, and insert the plug of the
fan in a socket. Select the desired speed by pressing the buttons on the
control panel (4):
0 =off 1 =minimum speed 2 =medium speed 3 =maximum speed
OSCILLATION:
5EA23
For the automatic oscillation from right to left press the knob (5) placed
on top of the motor. To disable it, pull up the knob.
5EA30 / 5EA30W / 5EA40 / 5EA40W / 5AM30 / 5AM40
For the automatic oscillation from right to left press the knob (6) placed
on top of the motor. To disable it, pull up the knob.
VERTICAL SLOPE:
5EA23 / 5EA30 / 5EA30W / 5EA40 / 5EA40W /
5AM30 / 5AM40
You can vertically point the front of the fan
choosing the desired angle. It is sufficient to
move the front of the fan up or down according
to the desired slope.

Maintenance

Before carrying out the regular cleaning operations turn off the fan and
unplug i.
For external cleaning use a soft and dry cloth.
DO NOT disassemble the fan: this fan cannot be disassembled.
DO NOT dip the device in water, or splash it with any other liquids.
DO NOT use solvents or any other chemical products for cleaning it.
When you do not use it, after cleaning it, store the fan in a dry place.
15