Accustic Stop-Function (Voice Control); Basic Adjustment For The Training - MEDICA THERA-vital Gebrauchsanweisung

Accustic stop-function
(Voice Control)
This feature makes it possible to stop
THERA-vital in a danger situation by a long,
loud call that lasts 3 seconds.
The acoustic stop-function is always active.
You can adjust the sensitivity of the micro-
phone which is included in the console in the
menu technique/sensitivity of microphone.
Adjust the sensitivity as follows:
<>
<++>
<++++>
Check the correct adjustment in a
practical trial.
To continue the training push the button
START after an acoustic stop.
Downloaded from www.Manualslib.com
Basic adjustment for the
training
In condition of delivery the settings like on
page 38 in the column standard described are
programmed.
If you change anything in the subprogram
these changes will remain even if you switch
the device off or take it off the socket. The
next training can be done in the same condi-
tions.
If you want to change the basic adjustments
if very loud noises occur in the
into the standards again:
surrounding area
Push the STOP button and keep it pressed.
if normal noises occur in the
Push now the minus buttons simultane-
surrounding area
ously.
if little noises occur in the
Now the standards as described on
surrounding area
page 38 are valid again. The adjustments
in the area "technique" remain.
manuals search engine
42