Herunterladen Inhalt Inhalt Diese Seite drucken

MEDICA THERA-vital Gebrauchsanweisung Seite 43

Vorschau ausblenden Andere Handbücher für THERA-vital:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Bio-Feedback
Bio-Feedback serves to give the patient a re-
sult of the movement process during the exer-
cise.
In the upper part of the display you will find the
following values:
actually set treading resistance/set power
demand,
actual number of rotations of the pedals,
remaining training time,
distance,
if HRM reader is plugged in, the actual
heart rate,
or
the actual achieved capacity of the patient
when training actively.
Bio-Feedback is only possible during leg-
training and in direction of rotation for-
ward ( ).
Sym-Bar/Sym-Road:
These both ways of visualising feedback
show how symmetric the active training is,
that means how big the differences in capac-
ity are on the right and on the left leg.
The Bar-Diagram shows the activity in the
left/right leg. In summary, there will be always
100 %.
Downloaded from
www.Manualslib.com
The result can be falsified if the pedal
radius is adjusted differentely (see
pages 31, 32) or the patient is not
seated in a middle position to the de-
vice.
manuals search engine
15:05 min
10
34
11,9 km
1/min
43 Watt
30%
70%
The representation Road shows a point that
moves on the presented road in accordance
to the activity of the power to the left or the
right. Furthermore the number of rotations is
presented as moving less or more fast mid-
dle-stripe of the road.
15:05 min
10
34
11,9 km
1/min
Pulse 110
40
Passive-display:
At the passive training the console shows a
bar that represents the motor power which is
necessary to move the legs. The maximum
height of the bar corresponds to the power
(see page 39) that is set as motor power.
15:05 min
10
34
11,9 km
1/min
80 %
Example:
maximum motor power = 12 Nm
Adjustment of the motor power = medium
(
80 %)
→ 100 % in the bar-diagram
9,6 Nm
Changing the radius of the pedals has a major
influence on the display of the bio-feedback.
The %-value of two training units are only
comparable if the radius of the pedals and the
maximum motor power (subprogram) are set
the same.
This representation is not meant for
scientific evaluations! It is meant to
show the patient whether he is during
his training very soft or very tied or if
the muscle tone was reduced.

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis