DeLonghi Pinguino F12ECO Betriebsanleitung Seite 19

[rt!!I]ü@(MIN]i)* [1'@11*@
TURN THE APPLIANCE OFF
TO TURN THE UNIT OFF COMPLETELY, SET THE FUNCTION SELECTOR TO THE "0" POSITION AND
UNPLUG FROM THE MAINS
THE LEDS
Led displays come on depending on the selected function or as warning of possible anomalles.
* The leds will light up 3 minutes after the machine is turned on (that is, when the compressor
starts to work). They will turn off when the temperature set by the thermostat is reached.
" The leds will light up 3 minutes after the machine is turned on (that is. when the compressor
starts to work)
When in the dehumidifying mode, the appliance operates continuously. If the temperature is
too low, the anti-freeze thermostat intervenes, interrupting the operation.
ELECTRICAL CONNECTION (U.K. ONLY}
A) If your appliance comes fi#ed with a plug, it will incorporate a 1 3 Amp fuse. If it does not fit your socket the plug should
be cut off from the mains lead, and on appropriate plug fitted, as below. warning: Very carefully dispose of the cut off
plug after removing the fuse: do not insert in a 1 3 Amp socket elsewhere in the house as this could cause a shock hazard.
Wilh alternative plugs not incorporating a fuse, the circuit must be protected by a 1 5 Amp fuse. If the plug is a moulded-
on type, the fuse cover must be re-fitted when changing the fuse using a 1 3 Amp Asta approved fuse to BS 1362. In the
event of losing the fuse cover, the plug must NOT be used until a replacement fuse cover can be obtained from your nea-
rest electrical dealer. The colour of the corred replacement fuse cover is that as marked on the base of the plug
B) If your appliance is not fitted wilh a plug, please follow the instructins provided below:
WARNING - THIS APPLIANCE MUST BE EARTHED
IMPORTANT
The wires in the mains lead are coloured in accordance with
the following code:
Green and yellow Earth
Blue Neutral
Brown Live
--*--
As the colours of the wires in the mains lead may not corre-
spond with the coloured markings identifying the terminals
in your plug, proceed as follows:
The green and yellow wire must be connected to the termi-
nal in the plug marked with the leiter E or the earth symbol
* or coloured green or green and yellow.
The blue wim must be connected to the terminal marked with
the leiter N or coloured black.
The brown wire must be connected to the terminal marked
with the leiter L or coloured red.
19
THE START OF THE FUNCTIONS MAY UNDERGO SLIGHT DELAYS WITH RESPECT TO THE ROTATION OF
THE SELECTOR.
FUNCTION
LED W * [jk] LED */* [@]
OFF
AIR-CONDITIONING
on* on
DEHUMIDIFYING
on**
on
VENTILATION/PURIFYING
on