Choosing A Place For The Oven - Sharp K-62D19IM0-EU Bedienungsanleitung

CHOOSING A PLACE FOR THE
OVEN
There are several points to pay atten-
tion to when choosing a place for your
oven.
Make sure to take into account our re-
commendations below in order to pre-
vent any problems and dangerous situ-
ations, which might occur later! When
choosing a place for the oven, attention
should be paid that there are no flam-
mable or combustible materials in the
close vicinity, such as curtains, oil, cloth
etc. which quickly catch fire.
Furnitures surrounding the oven must
be made of materials resistant to heat
more than 50 C° of the room tempera-
ture.
Required changes to wall cabinets and
exhaust fans above the built-in combi-
ned product as well as minimum he-
ights from the oven board are shown in
Figure 1. Accordingly, the exhaust fan
should be at a minimum height of 65 cm
from the hob board. If there is no ex-
haust fan the height should not be less
than 70 cm.
INSTALLATION OF BUILT-IN
OVEN
Insert the oven into the cabinet by pus-
hing it forward. Open the oven door and
insert 2 screws in the holes located on
the oven frame. When the product fra-
me touches the wooden surface of ca-
binet, tighten the screws.
If the oven is installed under a hob, the
distance between the worktop and the
top panel of the oven must be a mini-
mum of 50 mm and the distance bet-
ween the worktop and the top of control
Figure 1
EN -9-