Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Calc-Clean reminder light (specific types only)
-
After a certain period of use, the colour of the SmartLight
changes to amber. Then you need to perform the Calc-
Clean process.
Tip: If the water in your area is hard (e.g. when flakes come
out of the soleplate during ironing), use the Calc-Clean
function more frequently.
Note: The SmartLight resets itself automatically and lights up
blue the next time you plug in the iron, even if you have not
performed the Calc-Clean process.
Do not put vinegar or other descaling agents in the water tank.
Using the Calc-Clean function
1
Make sure the appliance is unplugged.
2
Set the steam slider to 'no steam'.
3
Fill the water tank to the MAX level.
4
Insert the plug in an earthed wall socket.
5
Wait for the SmartLight to light up steadily, then unplug
the iron.
6
Hold the iron over the sink, press and hold the Calc-Clean
button and gently shake the iron to and fro.
Note: Steam and boiling water come out of the soleplate.
Impurities and flakes (if any) are flushed out.
7
Release the Calc-Clean button as soon as all the water in
the tank has been used up.
8
Repeat steps 1 to 7.
After the Calc-Clean process
1
Put the plug back into the wall socket, and let the iron
heat up to let the soleplate dry.
2
When the SmartLight lights up steadily, move the iron
gently over a piece of used cloth to remove any water
stains that may have formed on the soleplate.
3
Unplug the iron and let it cool down before you store it.
Storage
1
Slide the steam slider to 'no steam'.
2
Remove the plug from the wall socket.
3
Empty the water tank and let the iron cool down in a safe
place.
ENGLISH
11
Werbung
