Getting Started; Assembling And Setting Up The Soupmaker - Silvercrest SSKE 300 A1 Bedienungsanleitung

Getting started

The blender jug (3) should be cleaned before first use. For more on this, please refer to the
"Maintenance/cleaning" section on page 20. Before use, ensure that all parts are completely dry.

Assembling and setting up the soupmaker

Warning!

Only use the appliance in dry, enclosed spaces. Never use it outdoors.

Place the soupmaker on an even, stable and heat-resistant surface only. If the soupmaker
is not placed on an even surface the movement of the boiling contents could make it tip
over, possibly causing damage to property and burns.

Maintain a clearance of at least 50 cm around the appliance. This will help prevent
damage caused by escaping steam.
Risk of fire!

Do not place the appliance on textile surfaces such as a tablecloth.

Do not place the appliance on metal surfaces. These may become very hot and cause a
fire.

Do not place the appliance under or directly next to flammable objects, e.g. curtains or
blinds.
1. Place the motor unit (6) on an even, non-slip and dry surface. Do not connect the power cable (9)
plug to the wall outlet yet!
2. Insert the measuring cap (1) into the lid (2). Align it so that the plastic tabs on the measuring cap (1)
fit into the notches on the lid (2). Then rotate the measuring cap (1) clockwise to lock it into place.
3. If required, insert the strainer (C) or the egg basket (D) into the blender jug (3). The strainer (C) is
locked into place when the lid (2) is closed. The egg basket (D) must be pushed into the blender jug
(3) until it locks into place.
4. Place the lid (2) on the blender jug (3). To do so, the lid (2) must first be rotated so that the open
lock symbol is aligned with the arrow on the handle (4). Press the lid (2) onto the blender jug (3)
and rotate the lid (2) clockwise until the closed lock symbol is aligned with the arrow on the handle
(4). This will lock the lid (2) in place and prevent it from being inadvertently loosened during
cooking.
5. Place the blender jug (3) onto the motor unit (6). To do so, align the blender jug (3) so that the
contacts on the blender jug (3) can be pushed into the socket on the motor unit (6).
The soupmaker can only be switched on once the blender jug (3) is properly locked into
position and correctly seated on the motor unit (6).
SilverCrest SSKE 300 A1
English - 13