Maintenance And Cleaning - Princess 212015 Anleitung

Randstad_Classic_Compact_Blender_212014.book Page 5 Tuesday, August 8, 2006 9:51 AM
Maintenance
and cleaning
• Make sure no moisture gets into the
interior of the housing.
• Do not immerse the appliance in
water, or in other liquids. If this
happens do not use the appliance any
more; dispose of the appliance.
• Only the loose parts may be cleaned in
a dishwasher.
• Never use corrosive or scouring
cleaning agents.
1 Clean the exterior of the appliance with
a soft, damp cloth.
2 Clean the interior of the jug and the
accessories with a damp cloth and a
few drops of washing-up liquid. This will
prevent pulp residues from caking onto
the appliance.
3 In particular, thoroughly clean the
rotating knives at the bottom of the jug
to make sure you remove all food
residues.
4 After cleaning fit all the parts to the
blender (see 'Fitting the parts'), close
the lid, and store the appliance.
Safety
General
• Please read these instructions
carefully and retain them for
reference.
• Use this appliance only in accordance
with the instructions.
• This appliance is intended solely for
domestic use.
• Keep the appliance out of the reach of
children, and of persons who may not
be able to operate it safely.
• Have the appliance repaired only by a
qualified electrician. Never try to
repair the appliance yourself.
Electricity and heat
• Verify that the mains voltage is the
same as that indicated on the type
plate on the appliance before use.
• Plug the appliance into an earthed
wall socket.
• Always remove the plug from the
socket when the appliance is not in
use.
• Always remove the plug from the wall
socket by pulling on the plug, not the
power cord.
• Do not use the equipment if it is
damaged, or if the lead is damaged.
Send it to our Service Department in
order to avoid a hazard. With this type
of appliance, a damaged cord should
only be replaced by our Service
Department using special tools.
• Make sure that the appliance and the
power cord do not come in contact
with sources of heat, such as a hot
hob or naked flame.
• Make sure that the appliance, the
power cord and plug do not come in
contact with water.
• Take care when touching the
appliance and its parts. Allow the
appliance to cool down first. The
appliance and its parts will become
hot whilst the appliance is in use. The
appliance's housing will also become
hot, since the housing is an excellent
conductor of heat.
Compact Blender Article 212014 / 212015
5