Ambu aView 2 Advance Bedienungsanleitung Seite 5

4. Use of the Displaying Unit
The letters in grey circles refer to illustrations on page 2.
4.1. First Time System Setup
1. Unpack the displaying unit and make sure that all parts are present. Refer to the parts described
in section 2.
2. Closely examine the displaying unit and other parts for any damage. Do not use the displaying
unit if it is damaged in any way. A
3. Turn the displaying unit ON by pressing the power button.
4. Connect the power supply to a power outlet and insert the power plug into the power inlet on
the back of the displaying unit. E
5. Log in as Administrator to get access to system settings. Press the Login
bar on the left side of the screen. Press the arrow
User list. Enter password and press Login
AmbuAdmin. It is required to change the password. For instructions on changing the password
please see the online Reference Manual on www.ambu.com.
1
6. Change System language by pressing the Settings
4
up and select Language to open the menu. Open the System language
and select language from the list. Note that the language will change immediately when selected.
4 5
8
D
tab on the tool
1 2
and select the Administrator from the
3
. The factory default Administrator password is
2
3
tab in the tool bar on the right. Press Set-
5
drop-down menu
6
7. Press Date & Time to adjust time, date and time zone. Open the Time zone
menu and select time zone from the list. Select Time format
the current date in the Date calendar.
10
7
8
6
9
8. For setup of Network, DICOM and General Settings refer to the online Reference Manual on
www.ambu.com. Find the Reference Manual in the download section on the product page. Here
you will find information regarding cybersecurity. This is important in order to setup and use your
product and data, so you are protected from being compromised in terms of Confidentiality, In-
tegrity and Accessibility.
Create User Profiles
As default the Archive is password protected. The Archive can be accessed by the Administrator
but it is recommended to create an Advanced User profile.
9. Press the Settings tab in the tool bar on the left. Press User Profiles and press
Administrator 11 to create a new profile. Enter Name, Password, Repeat Password
press the save button . For more information refer to the online Reference Manual on
13
www.ambu.com.
12 11
13
7
drop-down
8
, adjust Set time 9 and select
10
12 and
9