Herunterladen Inhalt Inhalt Diese Seite drucken

General Description; Testing Of The Internal Battery; Starting Of A Vehicle; Charging Of The Internal Battery - GYS GYSPACK 400 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für GYSPACK 400:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 6
Congratulations for the selection of this product, which has been designed with great care. To
get the best use of it, please read carefully the following instructions. Keep this instruction
manual safe, you may want to read it again later.

GENERAL DESCRIPTION

This autonomous starter is intended for the starting of vehicles equipped with a 12 V battery.
GYSPACK functions thanks to a high performance battery. For an appropriate use of the
machine and a longer lifetime of its internal battery, it is essential to connect to the sector the
GYSPACK after each use and keep it connected until the next use.
Warning: To avoid any damage or explosion, respect the polarity during the clamp connection.
Tension errors are not covered by the warranty.

TESTING OF THE INTERNAL BATTERY

Test the battery before each use: press on the test button, the result is displayed as follow:
Green indicator: The battery is charged. Can be used for starting vehicles.
Orange indicator: It is strongly advised to recharge the GYSPACK before use.
Red indicator: obligation to recharge.
Warning: never use the Machine when the red indicator is on.

STARTING OF A VEHICLE

1- Turn ignition off before connecting the GYSPACK to the car's battery.
Do not touch the red clamp with the black clamp.
2- Connect the red clamp to the positive pillar (+) of the battery, then the black clamp to
negative pillar (-).
3- Switch the ignition to start.
Note: Do not use the self-contained starter for more than 6 consecutive seconds.
A 3 minutes rest period between sessions must be respected.
A vehicle which is not starting can have another problem than a battery discharge:
!
alternator, plug preheating...

CHARGING OF THE INTERNAL BATTERY

Connect the main plug to the 220V power supply and the minor plug to the charging socket in
the front panel of the GYSPACK.
The charge stops automatically and the green indicator lights when the battery is charged.
Note: the Gyspack must always be placed in vertical position when in charge. If not, there is a
risk of acid leak and destruction.

NO WARRANTY FOR THE BATTERY

Gyspack contains a high performance battery, which imperatively needs to be recharged after
each use. If this condition is not respected, within 24 hours the battery gets sulphated. This
causes an irreversible deterioration of the battery.
For this reason, the battery of the Gyspack, which is expensive, is not under warranty, because
its conservation depends on its use.
Gyspack AUTO / Gyspack 400
4

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Gyspack auto

Inhaltsverzeichnis