Programming Transmitters/Channels; Programming Further Transmitters/Channels; Deleting Of Transmitters/Channels - Selve commeo Adapter Plug Betriebsanleitung

GB
iveo initial operation/Setting

7.1. Programming transmitters/channels

7.1.1. Programming further transmitters/channels

Press the PROG button of a programmed transmitter/channel for
3 seconds (wait for confirmation run from the receiver). The receiver
is now in programme mode for 1 minute. Press (1 sec.) the PROG
button of the new transmitter/channel. The new transmitter/channel
has now been programmed.
Programmed
transmitter/channel
➧
3 s

7.1.2. Deleting of transmitters/channels

Press the PROG button of a programmed transmitter/channel for
3 seconds (wait for confirmation run from the receiver). The receiver
is now in programme mode for 1 minute. Press (1 sec.) the PROG
button of the transmitter/channel you wish to delete. The transmitter/
channel has now been deleted.
Programmed
transmitter/channel
➧
3 s
New
transmitter/channel
1 s
Transmitter/channel
to be deleted
1 s
32