Selve commeo Adapter Plug Betriebsanleitung Seite 27

commeo initial operation/Setting
If multiple receivers have been found, the selected receiver can be
changed by pressing the SELECT button for 1 second. The next
receiver will perform a brief confirmation run or rather a short reaction
of the end device. Only one receiver can be selected at one time for
moving, setting and programming.
SELECT mode
Receiver X
Exit SELECT mode
To exit SELECT mode (the status LED will flash slowly in
orange), press the SELECT button for 3 seconds.
3 s
Power interruption/
programmed transmitter
Receiver 1
SELECT 1 s
SELECT 1 s
Receiver 3
SELECT 3 s
Receiver 2
27
GB
SELECT 1 s
SELECT 1 s
GB