Explanation Of Functions/Terms Used; Commeo Initial Operation/Setting - Selve commeo Adapter Plug Betriebsanleitung

Explanation of functions/terms used

GB
5. Explanation of functions/terms used
General
Manual operation by using the operating button at the Adapter
Plug
A short keypress on the control button on the device switches the
end device on or off.
Manual operation by using a transmitter
A short keypress on the UP button switches the end device on. A
short keypress on the STOP or DOWN button switches the end
device off.
Automatic operation by using a commeo time switch
An automatic UP running time of a time switch (e.g. commeo Multi
Send) switches the end device on. An automatic DOWN running time
of a time switch switches the end device off.
Automatic operation by using an iveo time switch
An automatic DOWN running time of a time switch (e.g. iveo Multi
Send) switches the end device on. An automatic UP running time of
a time switch switches the end device off.
GB

6. commeo initial operation/Setting

commeo initial operation
The commeo initial operation is only possible using commeo trans­
mitters. To complete the settings in the receiver, the receiver must be
selected with a transmitter in SELECT mode. In SELECT mode, there
is only one connection at a time to a receiver. Only this one can be
moved and set.
25