Installation - Selve commeo Adapter Plug Betriebsanleitung

GB

Installation

4. Installation
Note:
Ensure that the controls are not installed and operated in the vicinity
of metal surfaces or magnetic fields. Metal surfaces or panes of glass
with a metallisation within the transmission path can reduce the
range considerably.
Installation steps
1. Plug the commeo Adapter Plug into an easy accessible, fixed
isolated ground receptacle.
2. Plug the mains plug of the end device into the commeo Adapter
Plug.
3. The end device is now manually switchable.
4. Programme a transmitter into the receiver (commeo Adapter Plug)
(see section commeo initial operation/Setting or iveo initial opera-
tion/Setting).
24