Totally Wicked Revolution VT60 Handbuch Seite 8

Using your Revolution VT60
"Start power" control in VT Mode: By default the Revolution VT60 is set up so that the
power supplied to the atomizer when the button is first pressed is 60W. To adjust this setting,
press the power button 3 times to enter setup mode. Turn the output adjuster to the left, and
the second row will blink. Then turn the output adjuster to the right to adjust the wattage, and
press power button to confirm.
Note:
1. The ideal output wattage in VT mode is normally 30-60W, because when the output
wattage is below 30W, it is difficult to reach 230°C (450˚F) so that vaporization will start.
2. VT mode only supports a maximum of 1.0 ohm. The device will automatically switch to VW
mode when the resistance is larger than 1.0 ohm.
3. In VT mode, when the resistance is 0.05 - 0.1ohm, the maximum output will be limited to
50W to ensure safe operation.
14
Downloaded from www.Manualslib.com manuals search engine
Press three
times to enter
setup mode
Press once
to select your
preference
15