Totally Wicked Revolution VT60 Handbuch Seite 7

Using your Revolution VT60
Locking the atomizer resistance in VT mode:
Press the power button three times to enter setup mode. Turn the output adjuster to the left
Press three Press once
twice, and the third row will blink. Turn the output adjuster to the right to lock or unlock the
times to enter to select your
resistance of the atomizer.
setup mode preference
Note: Please lock the resistance only when the coil is at room temperature. This will lock the
correct "base resistance" of the atomizer. Temperature control will remain accurate, as long
as the coil is not changed. Once the resistance is locked, you can remove the tank when the
coils are hot or cold and it will function under the same operating parameters. Please unlock
the resistance before you change to a different atomizer or the VT system will not work
correctly. When using the device with resistance unlocked, please ensure any new VT coil is
at room temperature when first used to retain temperature accuracy.
12 13
Downloaded from www.Manualslib.com manuals search engine