Totally Wicked Revolution VT60 Handbuch Seite 5

Using your Revolution VT60
Setup mode: Pressing the power button 3 times in quick succession will put the Revolution
VT60 into setup mode. Once in setup mode the output adjuster can be used to make
fundamental changes to the way in which the Revolution VT60 operates. Push the output
adjuster to the left to select the menu item to be adjusted, and to the right to select the
changes required. The top menu item specifies the operational mode with 3 options
available:
Temp Ni Temperature control for nickel 200 coil atomizer heads,
use only with nickel 200 coil material.
Temp Ti Temperature control for titanium coil atomizer heads,
use only with titanium coil material.
Power Direct control of power output
8
Downloaded from www.Manualslib.com manuals search engine
Press three
times to enter
setup mode
Press once
to select your
preference
9