Totally Wicked Revolution VT60 Handbuch Seite 10

Using your Revolution VT60
VW mode: In VW mode output wattage can be adjusted from 1W-60W by turning the output
adjuster, right to increase, and left to decrease. Holding the output adjuster to the right or left
will make the wattage setting rapidly increase or decrease.
Note:
• For kanthal or nichrome wire with resistance range 0.25-1.0 ohm,
the maximum output wattage is 60W as displayed on screen.
• For kanthal or nichrome wire with resistance range 0.15-0.24 ohm,
the actual maximum output wattage is limited to 50-55W to ensure safer operation.
Charging the battery: If selected, remaining battery charge is indicated on the OLED
Screen, and the battery charge indicator will flash when remaining charge is below 10%. The
battery can be recharged using the supplied USB lead plugged into a dedicated USB port or
wall adaptor. The Revolution VT60 can be used normally during battery charging.
18
Downloaded from www.Manualslib.com manuals search engine
Atomizer Head Replacement
• Unscrew the atomizer base from the tank.
• Unscrew the atomizer head and remove from
the atomizer base.
• Screw the new CL atomizer head into the
atomizer base and firmly tighten.
• Refit the atomiser base into the tank.
• Connect the assembled atomizer to the battery
and the Revolution VT60 is ready to use.
19